Low water
pressure
LCD
screen
does not
display
Dial or
button
problems
The timer
does not
water
1. Filter blockage
2. Inlet pressure not
sufficient to
support
watering needs
1. The battery is
exhausted
2. The display is exposed
to direct sunlight
1. The dial/valve is stuck
2. Accidentally holding
the OK button while
inserts the batteries
1. The dial turn to OFF
position
2. The faucet is not
turned on
3. The battery is dead, it
shuts down
automatically
4. Rain delay is ON
1. Check if the filter is
clogged, if so, clean
or replace the filter.
2. Make sure the timer is
installed properly and
not cross-threaded.
3. Installation of a booster
pump or other auxiliary
equipment of increasing
pressure.
1. Replace new 2*AAA
alkaline batteries and
installed correctly.
2. Avoid direct sunlight,
and observe if the
battery is too low.
1. Same procedure as
above.
2. Turn the dial to the OFF
to check if the valve
can be closed.
1. Rotate the dial to ON
position.
2. After finishing all
settings, turn on the
faucet.
3. Replace with new
alkaline batteries.
4. Waiting for the plan to
resume again.
If you need help in using the timer, please feel free to contact us.
US Free Hotline(English):
+1 833-381-5659
(MON-FRI 9:30 AM-5:30 PM PST)
EU Free Hotline(English Deutsch):
+44 800-808-5337
(MON-FRI 9:00 AM-5:00 PM CET )
Email:
WhatsApp:
+1 626-780-5952
- 21 -
ENEN
