USE ONLY ONE OF THE ZONES
OFF MODE
BATTERY STATUS
If you want to use only ZONE L and close
ZONE R, please set it up as follows.
1) Turn the dial to
"Start Time"
and press
"Zone"
to select ZONE R.
2) Press
"P"
button to switch Plan, then press the
"+"
or
"-"
button to adjust the Hour until the
screen displays OFF.
3) Turn the dial to
"ON"
to save the changes.
1) If you wish to stop all watering plan for an
extended period, turn the dial to "OFF".
(Your settings are saved)
2) The timer will not water automatically while in
OFF mode. (The screen will display the word
OFF in large letters)
3) To start watering automatically again, turn the
dial back to "ON" to resume your programmed
watering schedule.
* If you only want to use ZONE R and close ZONE L, the same applies.
Battery status will be displayed as following:
Note: NOTE
When the low battery indicator appears on display. The valve will
close automatically to avoid leakage. Please replace the battery in time
in case of interrupting normal operation.
Full
LOW Power
TIPS:
1.
If you need to turn off only one ZONE completely
, the P1, P2, and
P3 of the ZONE need to be set to the
"OFF"
state at the same time,
otherwise, the plans that are not set to the
"OFF"
state will continue
to work.
- 19 -
EN
