7. Select
TYPE of file system
, then press the
List
key to display the
existing file system types. Select the appropriate type and press
Enter
.
8. Press
the
Enter
key to mount the file system.
The
Command Status
screen displays, confirming the successful mounting of the file
system.
2.3.4 Create a Database to Store mvEnterprise Data
The config file is updated by the install program while it creates a
database on the file systems, which were set up above. During the
software installation, the install procedure prompts:
Enter initial data base names:
When done, type “end”.
In the above example, type
/mvefs/mvelv00/DB
where
DB
is a user
selected name. It is recommended that the
-i
option (to initialize the
database) be used with the install program. If multiple database files are
to be created on the same file system, a unique name is needed for each
of the DB files. In the example below, two database files are created:
0/mvefs/mvelv00/DB0
0/mvefs/mvelv02/DB1
end
mvEnterprise Release 4.1 on AIX Installation Guide Page 57