mvEnterprise Release 4.1 on AIX Installation Guide Page 59
2.4 Configure the System to use Ethertape
2.4.1 Update the System to use Ethertape
For new installations, a system configuration file must be changed in
order to use ethertape.
1. Ensure that you are logged in as
root
.
2. Edit the system configuration file. Type:
vi
/etc/pse.conf
3. Locate the appropriate headings, remove the comment symbol from
these lines if necessary, and save the changes.
# PSE communication protocols
d+ xtiso unixdg /dev/xti/unixdg # unix domain datagrams
d+ xtiso unixst /dev/xti/unixst # unix domain byte-stream
d+ xtiso udp
/dev/xti/udp # UDP/IP
d+ xtiso tcp
/dev/xti/tcp # TCP/IP
# PSE modules
m
timod
#
TLI
module
m
tirdwr
#
TLI
read/write
interface
4. Reboot the machine to implement the changes.
