9
Removing/Replacing Tip Ejector Arm
Removing the Tip Ejector Arm:
1. Press and hold the tip ejector button fully down.
2. With the other hand, pull the ejector arm out of
the Pipetman using the plastic ejector arm
release collar.
Replacing the Tip Ejector Arm:
1. Press and hold the tip ejector button fully down.
2. Hold Pipetman in one hand and the tip ejector
arm in the other hand.
3. Align the plastic collar at the end of the tip ejec-
tor with the rod inside the handle.
4. At the same time place the tip ejector opening
over the end of the Pipetman shaft.
5. Push the plastic collar into the handle until the
tip ejector is securely in place. Make sure that
tips will fit properly on the shaft.
Figure 3
Tip Ejector Arm
2. Pull arm from handle using
ejector arm release collar.
1. Press tip ejector button.
Tip Ejector Arm Removal
1. Press tip ejector button.
2. Hold Pipetman in one hand
and the tip ejector arm in the
other hand.
3. Align the plastic shaft at the
end of the tip ejector with the
rod inside the handle.
4. At the same time place the tip
ejector opening over the end
of the Pipetman shaft.
5. Push the plastic collar into
the handle until the tip ejector
is securely in place.
Tip Ejector Arm Replacement
pipetman rev I 9/13/00 3:12 PM Page 11
