7
PROGRAMMING YOUR WATER SOFTENER
The valve has 2 levels of programming – Level 1 and Level 2
You will need to only go through Level 1 programming to start up your unit. Level 2 programming is factory set and
can be changed only if desired.
In level 1 programming you can set current time, date, number of people in your home and the feed water hardness.
Level 1 programming is completed in 5 easy steps.
Level 1 PROGRAMMING
STEP 1 : Set Current Time
1.
Press
MENU
for 3 seconds
5.
Press
SET/REGEN
once
and the highlighted value
flashes
6.
Now press
UP
or
DOWN
key
to change the hour values to
current time
7.
Press SET/REGEN again. Hour
value will be accepted and
minute value will start flashing
2.
The display will read “
Press
MENU Key for 3 sec to unlock”
.
3.
After 3 seconds, the display will
beep confirming unlock
4.
Press
MENU
again and the
hour value becomes
highlighted
PRESS MENU KEY
3 SEC TO UNLOCK
CURRENT TIME
05
: 27 PM
CURRENT TIME
05
: 27 PM
CURRENT TIME
07
: 27 PM
CURRENT TIME
07 :
27
PM
CURRENT TIME
07 :
45
PM
8.
Now press
UP
or
DOWN
key
to change the minute value
to current time
CURRENT TIME
07 : 45
PM
9.
Press
SET/REGEN
again.
Minute value will be
accepted
and
AM/PM
value will start flashing
10.
Now press
UP
or
DOWN
key to
change the value to AM or PM
CURRENT TIME
07
: 45 AM
CURRENT TIME
07 : 45
AM
11.
Press
SET/REGEN
again to accept. Flashing stops & hour value
is highlighted again.
PROCEED TO STEP 2
JAN/21/2018
05:27 PM
