10
Level 2 PROGRAMMING (OPTIONAL SETTINGS)
NOTE :
Under normal use there is no need to change the settings under level 2 programming. You can, however,
change the default settings if required.
CAUTION: DO NOT CHANGE LEVEL 2 SETTINGS WITHOUT CONSULTING
RAINFRESH TECHNICIAN (1-800-667 8072). Wrongly changing the settings can result in malfunction of the unit.
When the Level 2 Master Programming Mode is entered, all available option setting displays may be viewed and set
as needed. Depending on current option settings, some parameters cannot be viewed or set.
To change any setting under level 2 programming
-
press the SET/REGEN key and the value flashes
-
press the UP
or
DOWN keys to change the value
-
press the SET/REGEN key again to accept value
-
press the DOWN key to advance to the next value
The following chart indicates choices and default settings.
Note:
Default settings are indicated in
bold letters
Use same programming method as you used in level 1 to advance and/or change values.
Bold letters indicate default settings
Parameter
Option 1
Option 2
Option 3
Option 4
Comments
1
System Language
English
Spanish
French
Set to French if desired.
Spanish not enabled
2
Valve Operation
Softener
Filter
Iron
Filter
Leave at default setting
3
Regeneration
Mode
Meter
Delayed
Meter
Override
Calendar
Clock
Meter
Immediate
Leave at default setting
4
Regeneration Time
2:00 AM
The unit is factory set to regenerate at 2:00
AM on the day of regeneration. You can
change to another time if desired.
5
Capacity
Calculation
Automatic
Manual
Automatic (recommended). Change to
manual settings if desired.
6
Resin Volume
For model 30C, set resin volume at 0.88 cu ft
For model 40C set resin volume at 1.06 cu ft
7
Salt Setting
Leave at default setting for maximum efficiency. (Defaults – 6 lbs/ft³)
Note:
Capacity = Amount of water that can be softened between regenerations. Capacity reduces
when salt setting is reduced, but salt consumption efficiency increases.
1.
Press
MENU
for 3 seconds
to unlock screen.
JAN/21/2015
05:27 PM
2.
The display will read “
Press
MENU Key for 3 sec to unlock”
.
3.
After 3 seconds, the display will
beep confirming unlock
PRESS MENU KEY
3 SEC TO UNLOCK
SYSTEM LANGUAGE
ENGLISH
4. Press and hold
UP
&
DOWN
keys
together
for three seconds to
enter
Level
Two
Master
Programming.
