Mounting gels on rolls
Drawing:
Step 1:
Attach the start and end colours to the midpart of the rolls with the heat resistant tape
(100 mm). Make sure trat the joining tape is on the outside of the gels when you wind up
the roll as described in Step 2.
Step 2:
Make sure trat the gel string is wound up counter clockwise on the roll with the black knob
(seen from the top). This makes it easier for you when you are mounting and synchronizing
the roll in the scroller.
Take care not to force the gold knob counter clockwise when tensioning the gel roll. If not
you might break the tensioning spring.
Summary of Contents for RCC 100
Page 1: ...RCC 100 Manual...