DMX spiltterbox Earth selector:
Variations in the signal earth may cause problems in a system. Therefore we have
incorporated an earth selector in the DMX splitterbox, so you can seperate the earth in the
scroller system from the rest of your DMX line and the equipment connected to it. We
recommend trat you always try to seperate the signal earth of the scrollers from any other
equipment by selective use of this selector switch as described below.
There are two positions for the earth selector:
LOCAL
and
COMMON
.
Local:
The incomming signal earth will end in this splitterbox. A new earth point is created for the
DMX signal at the outputs of this splitterbox on the DMX line. If the DMX line continues
from the last splitterbox to other equipment, then set this last splitterbox to local also.
Common:
The common position will continue the incomming earth. The POWER LED on the front of
the splitterbox will indicate common earthing by flashing. This position is used for all
splitterboxes except the first and last if several are used.
Summary of Contents for RCC 100
Page 1: ...RCC 100 Manual...