Safety in the system:
We have incorporated several safety features in each RCC. The following can be good to
know.
Internal fuse:
An internal reversible fuse in each scroller will protect the rest of your system from
breaking down in case of major problems in a single unit. This fuse will automatically be
reset at no overload.
Line input:
The line input of the scrollers will withstand any voltage /- 24V relative to the
earth (pin1) without tearing the gel string.
Feedback pot:
The feedback pot inside each scroller has no end stops and will therefore not be broken by
forcing past the zero or end position.
Motor:
The motor is protected from overload and will not burn.
Auto motor shut off circuit:
The auto motor shut off circuit in each scroller will stop the RCC if for any reason the
position cannot be reached within 10 seconds. This could be caused by a broken cable,
locked rolls or other mechanical or electrical disturbance to the servo system. This ensures
trat a scroller never will run out of control. The scroller resets at power down aund up.
DMX card:
The DMX card is equipped with a watchdog trat will reset automaticcally at any signal
disturbance.
Summary of Contents for RCC 100
Page 1: ...RCC 100 Manual...