PAR scroller:
The PAR scroller can operate in analog or DMX mode. The three LED´s on the bottom of
each unit will indicate power and running status according to the text figure below.
DMX address:
Each unit in a DMX system has to be given an address. If several units have the same
address, they will respond simultaneously to incoming signals.
Analog or DMX selector:
This switch decides if the scroller works in Analog or DMX mode.
Fan:
This selector allows two fan speeds for optimum noise/cooling setting.
Range:
This is where you trim the gel range for the unit. See calibrating on page 8.
Summary of Contents for RCC 100
Page 1: ...RCC 100 Manual...