OVERVIEW
EQUIPMENT CHECKLIST:
Bottle Cap Assembly
Q-connect Tees & Tubing
Product Bottle
15/64” High Helix Drill Bits
Bottle Stand
Carrying Bag & Insert
Manual
3’ of 5/32” Replacement Tubing
Extra Grommet
Extra Duckbill Valve
Rubber Valve Plug
Bike/Foot Pump
Electric Drill - 18v Recommended
DBH Measuring Tape
Proper PPE (Refer to product label)
Q-connect Field Repair Kit (Recommended)
Schrader Valve
Pressure Relief Valve
Main Bottle Valve
Push-to-Connect
Coupling
Product Bottle
HARNESS
Bottle Stand
Dosing Tip Port
Tubing
Injection Tees
BOTTLE CAP ASSEMBLY (
top view
)
Injection Tee
Tip
INJECTION PORT
Handle
Valve
Push-to-Connect Tee
1
Harness Connector
(Quick-Disconnect)
Included:
You Will Need:
V.
REPLACING BLACK PUSH-TO-CONNECT TEE
1.
Remove tubing by pushing in and holding
the collet, then pulling out the tubing.
Ensure that tubing ends
are in good condition.
Switch faulty tee with replacement
tee, making sure that tubing is
inserted fully.
2.
3.
VI.
REPLACING SCHRADER VALVE CORE
1.
Use the core removal tool to unscrew
the Schrader valve core.
2.
Clear any chemical
or debris from the
valve (using
cleaning pick and
wire brushes), and
insert the
replacement core.
Retighten the Schrader
valve core.
VII.
CLEANING PRESSURE RELIEF VALVE
If pressure relief valve is not sealing
(leaking air) or not opening when
pressurized over 65 PSI, use wire brushes
and pick with cleaning solution (isopropyl
alcohol) to thoroughly remove residue and
debris.
NOTE:
It is important to keep the pressure relief valve
functioning correctly to avoid potentially dangerous
over-pressurization. Only use water or an isopropyl
alcohol-based cleaning solution.
1.
2.
Add lubricant to the O-ring.
Schrader Valve Core
3.
For tech support and protocols call
877-272-6747
12
REPAIR
INSTRUCTIONS
You Will Need:
• A Schrader valve
core tool
• Cleaning tools
• A replacement valve
core (Q-connect
Field Repair Kit).
