Wall Anchors and Screws
There are two wall anchors and screws for the affixing of the unit to a solid surface. Wall
anchors and screws are also supplied to affix the solenoid valves to a solid surface surface.
TOOLS REQUIRED
The following is a list of tools required together with the purpose for each tool:
19mm Hole Saw
To drill a hole in the PVC pipe for the fitting of the tapping band.
A hole saw can be purchased from most hardware stores Spirit Level
For fitting the Chemigem horizontally to a solid surface.
Electric or battery charged drill
For drilling screws to hold the Chemigem and Solenoid valves
Drill Bits
5mm masonry drill bit for wall anchors (Refer to page 9)
•
3mm twist drill (for metal sheet or wood fixing)
•
10mm drill (for making holes in the lids of chemical drums)
•
Knife
For cutting the plastic tubing to required lengths
Screwdriver
For affixing self tapping screws
Tape Measure
To measure for the location of Chemigem components
Wrench
For tightening the tapping band. (Refer to page 10)
OTHER ITEMS REQUIRED
Other items required together with a brief description of the purpose of the items:
Pool Water Test Kit
A good quality test kit is essential for testing the pool water.
The pool water must be tested and balanced before the Chemigem is turned on.
PVC Tape
For use on the chemical drums, solenoid tubing and loose wires.
Protective Face Shield and Gloves
For use when diluting chemicals.
Metal Cover
An optional metal cover can be purchased from the supplier of the Chemigem.
RAINBOW
POOL
PRODUCTS
PTY
LTD