SETTING “AUTOMATIC” POOL PUMP TIMES
Utilising the automatic pool pump timer provides an assured method of achieving a regular
circulation of pool water through the pool filter. Further, as the Chemigem operates when the
pool pump is running, the pool water will automatically remain balanced.
Factory set times vary depending on State.
The electronic timer is purely a 24 hour device and
ON TIMES
cannot be greater in value than
OFF TIMES
.
The timer can be programmed to operate at the most convenient times during the day and can
easily be changed to suit varying pool usage at different times of the year.
Pump timing is a function of the
•
MAIN MENU
that is accessed by pressing keypad No. 4
labeled
ENTER
. Once the
MAIN MENU
is displayed on the screen, follow these steps:
The word
•
TIMER
will be flashing and it must be selected from the menu by pressing
ENTER
keypad No. 4.
The first timing program will be displayed with
•
PROG 1
flashing. To select others from the
seven programs available, press
ENTER
while
PROG 1
is flashing, to advance to program
2, 3 etc.
The
•
START
and
STOP
times are shown as two pairs of digits. The first pair in each case
being hours, the second pair being minutes. The 24-hour clock is used. To select the
START TIME HOURS
move the flashing symbol to the right by pressing keypad No. 6. The
HOURS
digits will now be flashing. To increase the
HOURS
press the
ENTER
keypad once
for every hour the start time is to be advanced. If advanced too far, keep advancing until the
display is returned to the required number
To select the
•
START TIME MINUTES
move the flashing symbol to the right again, using
keypad No. 6 as stated above and advance the minutes by 5 minutes for each press using
the
ENTER
keypad
Set the
•
STOP TIMES
by moving the flashing symbol further to the right with keypad No. 6.
Select it by pressing
ENTER
, and advance the hours as before with the
ENTER
keypad.
Complete by setting stop time minutes if required. If other start and stop times are required,
select
TIMER
and then
PROG 2
etc. and program start and stop times as required
Press
•
ESC
keypad several times to return to normal display.
TO SET THE CLOCK
A 24 hour clock is used
Select
•
MAIN MENU
by pressing
ENTER
(keypad No. 4)
Make the word
•
CLOCK
flash by pressing keypad No. 6
Select
•
CLOCK
by pressing keypad No. 4
The first two digits will be flashing. These are the hours that can be advanced by one hour
•
for each press of keypad No. 4
Move the flashing point to the right again using keypad No.6 and advance the minutes to
•
the correct time using keypad No. 4
Press
•
ESC
several times to return to normal display
RAINBOW
POOL
PRODUCTS
PTY
LTD