Rain Master Weather Center II, User Manual

Page: 29 / 65

Weather Center II User Manual Rain Master Irrigation Systems
Page 22
conductor) cable to the sensor terminal board and/or
Weather Computer according to the color code and wiring
diagram supplied (see Figure 15 - RME Eagle Wiring
Diagram
).
Step 3 Locate the 12 Volt DC Power Supply assembly (EV-PS).
Step 4 Plug the 12 VDC power supply (EV-PS) into the
enclosures internal AC receptacle.
Step 5 Connect the red and black wires to the Weather Computer
terminals 1 & 2. (See Figure 15 - RME Eagle Wiring
Diagram).
Step 6 Turn on the power to the RME Eagle Controller use the
AC power switch.
Step 7 Secure the Weather Center Tower access cover as
necessary. This completes the Weather Center
installation.
Note: The Weather Computer must be isolated from the
enclosure. The installation kit includes three (3)
nylon stand-offs which must be installed between
the enclosure back plate and the Weather Computer
mounting plate surface.
Figure 15 - RME Eagle Wiring Diagram
Note: The Weather Computer must be isolated from the
enclosure. The installation kit includes three (3) nylon stand-
offs which must be installed between the enclosure back plate
and the Weather Computer mounting plate surface.