Rain Master Weather Center II, User Manual

Page: 27 / 65

Weather Center II User Manual Rain Master Irrigation Systems
Page 20
Figure 13 - Weather Computer
2.1 Evolution DX2 Controller Wiring
Step 1 Turn off power to the Evolution DX2 Controller using the
AC power switch.
Step 2 Connect the remaining ends of the EV-CAB-WS12 (12
conductor) cable to the sensor terminal board and/or
Weather Computer at the Evolution DX2 Controller
according to the color code and wiring diagram supplied
(see Figure 11 - Evolution DX2 Wiring Detail
).
Step 3 Locate the 12 Volt DC DX2 Evolution Power Supply
assembly (EV-PS).
Step 4 Refer to Figure 14 - Weather Center Evolution DX2
Controller. Mount the power supply terminal strip to the
top of the Sensor Terminal board located on the inside
panel of the Evolution DX2 Controller enclosure using the
two supplied screws.