GB
19
Note :
It is not necessary to use all 8 start times for each
program !
The transmitter will automatically file your start times in
chronological order from 00:00 to 23:59.
To cancel a start time : use the
key to display the start
times.
When you see the start time you want to cancel, hold down
the
key for at least 2 seconds or move to the
symbol “--:--“ after 11h59 or after 23h59.
3. SET THE LENGTH OF WATERING TIME FOR EACH
STATION
The station number appears at the left. To set the station
watering time, use the +/ON and -/OFF keys. Time is set
in 1-minute increments from 0 to 12 hours.
Each station must be assigned to a program.
Select the program with the ABC key. Use the
key to
move to the next station.
Note :
If there is an overlap on the same station, the 2nd
start time will not take place. All single station control modules
are programmed on station 1. Multi-station control modules
are always programmed starting with station 1.
Example : stations 1 and 2 for 2-station modules. Stations
1,2, 3, and 4 for 4-station modules.
You have now completed the programming
4. ERASE PROGRAM DATA IN THE TRANSMITTER
This function erases all program data in the transmitter except
current time and day.
Press the +/ON and -/OFF keys simultaneously and hold
them down for at least 3 seconds.
TBOS IR Anglais new der 5/11/04 15:20 Page 7
