GB
22
3. SYSTEM ON/OFF (irrigation ON/OFF mode)
The field transmitter has a function which can place the control
module in the “Off” mode. The default mode is “On” which
allows the programmed watering to take place. You can prevent
watering (rainy weather shutoff) without changing the
programmed cycles.
3.1 Plug the field transmitter optical connector into the control
module.
3.2 2 Go to the screen by repeatedly pressing
the key.
3.3 To prevent irrigation press the -/OFF key.
A cross will appear on the sprinkler.
When you receive the program from a module with the field
transmitter, you can see if the module is in the "ON" or "OFF"
mode. The only way to change the mode is by carrying out
a manual ON/OFF. It is impossible to change the mode by
just pressing the
key on the transmitter.
To return to the irrigation mode, repeatedly press the
➞
key
until the screen with the X on the sprinkler appears. Now
press the "+/ON" key. The cross disappears.
2.5 Press the +/ON key to start the cycle. After a maximum
of 20 seconds, irrigation will start.
The stations assigned to the program will operate in sequence
- one after the other - until the last station has finished watering.
Irrigation will then automatically stop.
If you wish to stop a manual cycle, press the -/OFF key.
Note :
If the system is in the “Off” mode (a cross on the
sprinkler, see next chapter) it is impossible to manually start
irrigation.
TBOS IR Anglais new der 5/11/04 15:20 Page 10
