background image

Safety Considerations

Safety Instructions

WARNING

• 

LIFE SUPPORT APPLICATIONS: THE PT5002 IS NOT DESIGNED FOR USE IN LIFE 

SUPPORT APPLIANCES, DEVICES, OR SYSTEMS WHERE MALFUNCTION OF 

THE PRODUCT CAN REASONABLY BE EXPECTED TO RESULT IN A PERSONAL 

INJURY. CUSTOMERS USING OR SELLING THESE PRODUCTS FOR USE IN SUCH 

APPLICATIONS DO SO AT THEIR OWN RISK AND AGREE TO FULLY INDEMNIFY 

THE MANUFACTURER AND SUPPLIER FOR ANY DAMAGES RESULTING FROM 

SUCH IMPROPER USE OR SALE.

• 

ELECTROSTATIC DISCHARGE INFLICTS IRREPARABLE DAMAGE TO 

ELECTRONICS. BEFORE INSTALLING OR OPENING THE UNIT, INSTALLERS 

MUST DISCHARGE THEMSELVES BY TOUCHING A WELL-GROUNDED OBJECT.

• 

THIS UNIT MUST BE INSTALLED IN ACCORDANCE WITH THE EMC 

(ELECTROMAGNETIC COMPATIBILITY) GUIDELINES.

Safety Rules and Precautionary Measures

The manufacturer accepts no responsibility whatsoever if the following safety 

rules and precaution instructions and the procedures as described in this manual 

are not followed�

• 

Modifications of the PT5002 implemented without preceding written consent 

from the manufacturer will result in the immediate termination of product 

liability and warranty period�

• 

Installation, use, maintenance, and servicing of this equipment must be carried 

out by authorized technicians�

• 

Check the mains voltage and information on the manufacturer’s nameplate 

before installing the unit�

• 

Check all connections, settings and technical specifications of the various 

peripheral devices with the PT5002 supplied�

• 

Never open the enclosure�

• 

Never touch the electronic components (ESD sensitivity)�

• 

Never expose the system to heavier conditions than allowed according to the 

casing classification (see manufacturer’s nameplate)�

• 

If the operator detects errors or dangers, or disagrees with the safety 

precautions taken, then inform the owner or the principal responsible�

• 

Adhere to the local labor and safety laws and regulations�

Page 6 

June 2020

Summary of Contents for PT5002









































Reviews: