Rain Bird ESP-LXME, Installation, Programming & Operation Manual, Page: 23 / 116

17 ESP-LXME Controller
Select Days to Water
Watering Days are the specific days of the week on which irrigation
programs are allowed to start.
The ESP-LXME controller can be programmed to irrigate on different
days, dates and cycles. Regardless of which Watering Cycle you set,
the controller will only start the program on the days or dates that
you select. For additional information see Watering Cycles later in this
section.
b b
NOTE:
The selections you make on the day positions of the
controller dial will carry over to the Watering Cycles day settings
and vice versa.
b g
Turn the controller dial to Mon 1.
A
The Custom screen appears. Press the Allow or Prevent buttons to
choose whether or not to allow irrigation starts to occur for that
day of the week.
b b
NOTE:
If the desired program is not selected, use the Program
Select switch to change it. See Section B, Program Select Switch
for more details.
B
Turn the controller dial to Tue 2 and repeat the process.
1 2
b e
Repeat this process for all other days of the week in the program.
Then change the Program Select switch and repeat this process to
select Days to Water for other programs as desired.