Rain Bird E-3 Installation, Programming & Operation Manual Download Page 17

16

This controller generates radio frequency energy and may cause interference to radio and television reception.
It has been type tested and found to comply with the limits for a Class B computing device in accordance with
the specifications in Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection
against such interference in a residential installation. However, there is no guarantee that interference will not
occur in a particular installation.

If this equipment does cause interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the follow-
ing measures:

• Reorient the receiving antenna.
• Move the controller away from the receiver.
• Plug the controller into a different outlet so that the controller and receiver are on different branch circuits.

If necessary, the user should consult the dealer or experienced radio/ television technician for additional sug-
gestions. The user may find the following booklet prepared by the Federal Communications Commission help-
ful:

"How to Identify and Resolve Radio-TV Interference Problems."

This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402,
Stock No. 004000003454.

PREFERRED BY PROFESSIONALS WORLDWIDE

Rain Bird Sales, Inc.

Customer Support Center

6991 E. Southpoint Rd., Bldg. #1

Tucson, AZ  85706

1-800-RAIN BIRD

(520) 434-6290 FAX

© 1998 Rain Bird Sprinkler Mfg. Corp.

® Registered trademark of Rain Bird Sprinkler Mfg. Corp.

PN 633659B

Summary of Contents for E-3


















Reviews: