19
Parameter
Units of
measurement
Value
Equivalent vibration level (ahveq) ) front / rear handle
m/s
2
9.0
Sound pressure level Lp
A
dB(A)
100
Sound power level Lw
A
dB(A)
112
Тегло на машината с празен резервоар, без шина и
верига
kg
3.3
PARTS DESCRIPTION
1. OPERATOR’S MANUAL-Included with unit. Read before operation and keep for future
reference to learn proper, safe operating techniques.
2. FRONT HAND GUARD-Guard between the front handle and the saw chain for protecting the
hand from injuries and aiding in control of the chain saw if the hand slips off the handle.
This guard is used to active the chain brake which is to stop the saw chain rotation.
3. CONTROL LEVER-Device for connecting and disconnecting the ignition system and
thus allowing the engine to be started, and device for enriching the fuel/air mixture in the
carburetor to aid cold starting.
4. REAR HANDLE (FOR THE FIGHT HAND)- Support handle located towards the rear of the
engine housing.
5. SILENCER COVER- Cover the silencer not to make operator touch to hot surface of silencer.
6. CLUTCH COVER-Protective cover to the guide bar, saw chain, clutch and sprocket when
the chain saw in use.
7. CHAIN TENSION ADJUSTER-This is device to adjust chain tension.
8. CHAIN CATCHER- A projection designed to reduce the risk of the operator’s right hand
from being hit by a chain which has broken or derailed from the guide bar during cutting.
9. SPIKED BUMPER-Device, fitted in front of the guide bar mounting point, acting as a pivot
when in contact with a tree or log.
10. GUIDE BAR-The part that supports and guides the saw chain.
11. CHAIN-Chain, serving as a cutting tool.
12. FROUT HANDLE (FOR THE LEFT HAND)- Support handle located at the front of the engine
housing.
13. FUEL TANK CAP-For closing the fuel tank. Turn cap clockwise to tighten. Tighten it firmly
with hand.
14. OIL TANK CAP-For closing the oil tank. Turn cap clockwise to tighten. Tighten is firmly with
hand.
15. STARTER HANDLE-The grip of the starter, for starting the engine.
16. AIR CLEANER COVER-Covers air filter.
17. CLEANER COVER KNOB-Device for installing the air cleaner cover knob clockwise to
tighten. Tighten it firmly with hand.
18. THROTTLE TRIGGER-Device activated by the operator’s finger, for controlling the engine
speed.
19. THROTTLE TRIGGER LOCKOUT-A safety lever which must be depressed before the throttle
trigger can be activated in order to prevents the accidental operation of the throttle trigger.
20. GUIDE BAR COVER- Remove device for covering the guide bar and saw chain during
transport and other times when the chain saw is not in use. 1. General guidelines for safe
operation.
1.1. Safe operation of gasoline chain saws.
Warning! Persons unfamiliar with instruction manual are not allowed to use chain saw.
Use the chain saw for cutting wood only.
Other use of the chain saw is the sole responsibility of the user who should bear in mind
that it may be dangerous.
The manufacturer is not responsible for losses and damages resulting from unintended use
of the chain saw.
