Raider RD-ST02, User Manual

Page: 16 / 110

16 www.raider.bg
• Keep work area clean and well lit. Cluttered and dark areas invite accidents.
•Check the landscape where the machine will be used and remove all objects which could be caught and
thrown away. Damage of the machine or operator’s injury could be caused.
•Do not operate tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or
dust.
•Keep children and bystanders away while operating a tool. Distractions can cause you to lose control.
DEVICE-SPECIFIC SAFETY INSTRUCTIONS
•Know your tool. Read owner’s manual carefully. Learn its applications and limitations as well as
the specific potential hazards related to this tool. Familiarise yourself with the controls on the
machine and how to use them.
•Special care should be drawn to the following issues when using this machine: operation methods,
procedures, surroundings, and environment states, etc. Never work with the machine in high speed, on
slippery surface.
•All guards and safety attachments must be installed properly before using the unit.
•Inspect the unit before use. Ensure the parts are installed correctly and secure.
•When operating the machine, while taking care of your safety, you should also be cautious to avoid any
harm to other people. Call nearby passengers’ attention to avoid potential personal injury.
•Use for snow removal only.
•When using the machine you must respect local laws and regulations regarding noise control and
environment protection. To avoid any noise disturbance to other people, you should carefully decide
operation time and consider the surrounding conditions.
•Clear the area to be plowed before each use. Keep work area clean. Cluttered areas and benches invite
accidents. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or
become entangled in this tool.
•Work with the machine only on safety surface. Do not work on stone or gravel surfaces -danger of
machine damage and flying stones.
•When using this machine, the user should be cautious about the nearby status or changes: The user
should constantly observe the position and movement of other people, nearby window, vehicles, obstacles,
etc. Exercise caution to find any small piece of rocks or other articles in the snow to avoid them from flying out
and causing personal injury. Pay attention to the angle of the throw.
•Thrown objects which ricochet can cause serious injury to the eyes. Wear safety glasses. Everyday
eyeglasses have only impact resistance lenses. They are not safety glasses.
•Keep the are of operation clear of all persons, particularly children and animals. Keep children and
visitors away. Visitors should wear safety glasses and be kept a safe distance from work area. Do not let
visitors contact too or extension cord.
•Dress properly. Do not wear loose clothing or jewellery. They can be caught in moving parts. Rubber
gloves and non-skid footwear are recommended when working outdoors. The user should wear a protective
helmet to avoid your hair from getting in contact with any revolving part of the machine.
•Keep hands, face and feet at a distance from all moving parts. Do not touch or try to stop the machine
when they are rotating. Do not operate without guards in place.
•Keep hands away from moving parts. Shut off engine before unclogging discharge.
•Do not use hands to unclog discharge. Blocked snow thrower you can release by a suitable tool. Stop
motor before removing debris. Do not walk in front of running machine. Do not direct discharge at bystander.
•Move up and down slopes when clearing snow. Do not go across a slope. Use caution when changing
direction. Do not use this snow thrower to clear snow from steep slopes.
•Move the appliance at a step pace.
•When stepping backwards, be cautious about any obstacles beneath your feet or behind you
to avoid falling. •When using the machine the user must keep correct postures. Heels should be placed
firmly on
the ground, while the hands hold the handles firmly.
•Be especially careful when changing the movement direction when going up. Do not work in
too steep positions.
•When you examine, service clean the machine or replace parts, you must turn off the power switch and