27
Faults
Removal
Reasons
Trimmer does not
start to work
Power cable is not connected or
damaged
Check cable. If necessary, replace it.
The engine start
but the knife does
not rotate.
Trimmer is in a tall grass.
Upon initial release always put the
trimmer in the grass
It is possible that the trimmer is
fuzzy and the blade is blocked.
Disconnect the plug and check it. Put
on your protective gloves and clean the
knife and release
Engine is turned off
suddenly.
The power plug is withdrawn
Check cable. Make sure it is well
enshrined in the device and plug it
again.
Unusual noise.
Bolt of the blade is loose or
connections between fasteners. Fasten the parts.
Strong vibrations.
Distorted and damaged knife.
Immediately stop the trimmer and
replace the knife in a specialized
service.
Unequal mowing.
Engine work
hard and reduce
turnovers.
The grass is very high.
Increase mowing height.
The blade is blunt.
Replace or tipped knife. .
It is possible that the trimmer is
fuzzy and blocked
Look underneath the trimmer and clean
it. Work always with protective gloves.
The blade can be installed
incorrectly.
Check.
If necessary, repair your trimmer is best carried out only by qualified experts in workshops
on RAIDER, which used only original spare parts. Thus ensuring their safe operation.
7. Protection of the environment.
For the environmental protection of the power tool, the electrical appliances
and packaging must undergo appropriate processing for the re-use of the valuable
raw materials contained therein. Do not dispose of power tools in household waste!
According to EU Directive 2012/19 / EC on end-of-life electrical and electronic devices
and the validation and as a national law, power tools that can no longer be used must be
separately collected and subjected to appropriate processing for the recovery of the contents making
them valuable raw materials.
Summary of Contents for RD-LMGT01
Page 40: ...40 www raider bg EXPLODED VIEW AND SPARE PARTS LIST ...
Page 57: ...57 ...
Page 61: ...61 ...
