Raider RD-LMGT01, User Manual, Page: 25 / 62

25
The cord should be cut automatically at the position that is
allocated a maximum (outside the protective cover). To
achieve the required length of the cord, hold the button, as it
was shown in Figure B, and C.
Long grass must be mowed in layers as shown in fig. D
Attention ! Never mow wet grass or wet .
Keep trimmer from hard surfaces and injuries.
3.3 Angle and direction of mowing Fig. (E) 3.4
Replacement Spool Fig . (C)
· Turn off the trimmer from the socket ;
· Turn machine cutting equipment upward ;
· Hold firmly with one hand propeller motor. With the
other hold the spool holder. Pull the blade out of the
holder while the parts are separated .
· Replace empty spool and clean the inside of the
holder of the remnants of grass and dust.
· Then put the new pulley and reassemble the parts in
reverse order.
· Download of the twine to ensure proper placement
of the reel.
· Replace the cord just the same kind of brand
“RAIDER”