19
1.26. In reversing the direction of movement on slopes be very careful!
1.27. When you move backward or pull the machine be very careful!
1.28. When mowing machine always push forward. Never pull it towards your body.
1.29. Where transfer must tilt the machine when crossing zones without grass and when
transporting the machine to and from the area, which will mow, the machine must be switched off and
the cutting blade must be stopped.
1.30. Never lift or transport your lawn mower if the motor working and grass cutting blade is
rotating.
1.31. Do not tilt the machine when the motor unless it is not necessary due to the presence of very
high grass. In this case, lift the remote side of the machine by pressing the handle down and then only
as necessary. When you run the machine, hold it firmly with both hands.
1.32. When you turn the power mower for grass to watch your feet are at a safe distance from
rotating parts.
1.33. Do not use the machine when you’re barefoot or in sandals. Always use a strong, closed
shoes and long trousers.
1.34. Switch off the On/Off switch and remove the plug from the mains electricity always:
when moving away from the machine;
before removal of items, which blocked the machinery;
when checking, cleaning or working on machinery;
when the machine starts to vibrate abnormally;
after coming into contact with a foreign body immediately check the machine for damage before
it benefit to removing them;
1.35. The operator or user responsible for accidents, injuries to others or the environment and
caused material damage.
1.36. Electric grass mower is designed so that all moving parts and hull ensure safe conditions for
use. For damage caused by attempts to change the structure of the electric grass mower manufacturer
is not liable.
1.37. In order to ensure safety should only use genuine parts or parts recommended by the
manufacturer.
1.38. Failure to comply with the instructions may lead to electric shock, fire and / or severe injuries.
2. Functional description and purpose.
Electric mower is a manual with power isolation second grade. It is driven by a collector single-
phase alternating current motor and is designed for cutting grass at home. Not use the power mower
for grass operations other than its intended purpose.
3. Assembly of the components of the electric grass mower and commissioning.
Some of the mower parts are dismantled in order to reduce the volume of container during
transport.
3.1. Mounting the handle.
Place the bottom of the two tubes of the handle in the openings of the housing so that the
small transverse holes for locking screws at both ends of the tubes to coincide with the smaller side
openings in the housing. Insert locking screws into the holes and screw them. Plug the device for
holding the extension cord, the tube of the upper handle. Install the top of the handle to lower handle
with self-locking screws and nuts with handles . Attach the switch in the upper part of the handle by
means of two screws. Screw them on the inner side of the handle so that the openings therein are
aligned with holes in the housing of the On/Off switch. Attach the power cord to the handle with clamp
to hold the cable to the handle.
3.2. Assemble the plastic grass basket by joining the two parts. To this end, insert the pins of the
lower half in the corresponding holes in the upper half. Press until you hear a click. After assembling
the basket lift up the cover and attach underneath the finished basket on both hooks at the lown
mower body. Submit cover to lie on the basket. Always make sure the basket for collecting grass
clippings is well secured! If you do not need to collect the grass, it can mow without the basket, but
necessarily with cover!
3.3. Place the wheels of the front and rear axles, put washer so that you can put cotter pin into the
Summary of Contents for RD-LMGT01
Page 40: ...40 www raider bg EXPLODED VIEW AND SPARE PARTS LIST ...
Page 57: ...57 ...
Page 61: ...61 ...
