Raider RD-GLM09, User Manual

Page: 25 / 112

25
DISCONNECT SPARK PLUG WIRE
Before setting up your lawn mower.disconnect the spark plug wire from the spark plug.and
ground it against the engine by attaching rubber boot to a bolt or metal clip to the groundling post
on the engine.See figure-4
SECTION 4: SET-UP INSTRUCTIONS
ITEMS REQUIRED FOR ASSEMBLY
• Pair of pliers ( Not necessary but helpful).
• Motor oil.
• Fresh Gasoline.
IMPORTANT: This unit is shipped WITHOUT GASOLINE or OIL in the engine. Be certain to service
engine with gasoline and oil instructed in the separated engine manual before operating your mower.
NOTE: Reference to right or left hand side of the mower is observed from the
operating position.
SET UP YOUR LAWN MOWER
Follow steps 1 through 3 to set up your lawn mower. LAWN MOWER WITH GRASS BAG CATHER
Setp 1 :Remove the grass bag from the
Step2: Unfold the upper handle . Press the spanner to fix the upper handle and lower handle
together.