Raider RD-GLM09, User Manual

Page: 26 / 112

26 www.raider.bg
Step3: Lift the rear flap ,fix the grass bag to the flap’s axleto make the bag and the unit together.
SECTION 5: CONTROLS
RECOIL STARTER
The recoil starter handle is attached to the upper handle.See figure 5, stand behind the unit in the
operating position to start the unit. Throttle cable assy
The throttle cable assy is attached to the upper handle.See figure 5.The throttle cable assy is used
to adjust the speed of the unit. If the handle of the throttle cable is put forward, the speed of the unit
is accelerated.
Cutting height adjustment lever
The cutting height adjustment lever is used to adjust the distance of blade from grass-ground.
Note: your mower is shipped with the cutting height in the lowest position.Adjust the cutting
height as follows.
The cutting height adjustment levers are located above the four wheels.
To adjust the cutting height.Pull the lever out and away from the mower and then
move it forward or backward to select a new cutting height.See Figure 6.