Raider 053100, User Manual

Page: 9 / 92

9
Read the user’s manual carefully for your own safety before proceeding with exposure. The tool can be plugged into any
isolated and unplugged contact (according to safety requirements). The contact must be 230V-50Hz, and a fuse of at least 6A.
WARNING! There is a risk of injury or damage to the instrument.
WARNING! Read the operating instructions before operating the tool.
WARNING! Use safety glasses.
WARNING! Use anti-phonics!
WARNING! Do not use the machine in the open in bad weather conditions.
WAY OF USE
Attention! Before you start working with the saw, check the voltage and frequency of the mains.
Attention! Check the guard if it moves normally without interfering with the cutting disc in any way.
Fix the circular saw
The RD-MS02 desktop saw blade is secured to the work table using the supplied screws. This action must be performed
before switching to the appliance!
Replacing the cutting disc
Attention! Before inserting the blade, make sure that the RD-MS02 circular saw is disconnected from the power cord. The
switch is in OFF position.
Attention! Never use a cracked or damaged cutting disc.
Attention! When transporting, place the cutting disc in the locked position with the locking bolts.
To replace the cutting disc, remove the protective cover - use the supplied key. The direction of unwinding is clockwise.
1. At the same time, press the spindle lock button (20.1) until it clicks.
2. Use the key to set the hexagonal bolt and flange.
Attention! Install a cutting disc according to the technical specifications given in this manual!
3. Place the cutting disc in accordance with the direction of rotation indicated by the arrow on the surface of disc