Raider Outboards R504500, Owner'S Manual

Page: 10 / 16

RAIDER SAFETY JET R504500
7
Revision A/2022.05.25//
I
NSTALLATION
I
NSTRUCTIONS
a. This section of the owner’s manual provides the instructions for the proper installation and
service of the Raider Safety Jet to your outboard motor. Improper installation or servicing of this
Raider product could result in damage to the Safety Jet, outboard motor, or personal injury to
those installing or operating the product.
b. Installation will not require the use of special OEM mounting hardware when assembling the
Safety Jet. Use only hardware provided by Raider or your outboard motor OEM. Anodic rim tab
or anodic plate on your existing motor can be left intact. There should not be a clearance issue
between the anodic trim plate and Safety Jet.
Prior to the installation of the Safety Jet remove the Lock Plate from the Engine Stop Switch
and disconnect the Start Battery. This will prevent the motor from starting or turning over
in the event of contact with the Start Button.
Performing service or maintenance without first disconnecting the battery can cause
product damage, personal injury, or death due to fire, explosion, electrical shock, or
unexpected engine starting. Always disconnect the battery cables from the battery before
maintaining, servicing, installing, or removing Safety Jet components.
After completing installation, place these instructions, propeller, and bolts in a secure place
for future use in the event you want to reinstall to the propeller
.