Raider Outboards R504500, Owner'S Manual

Page: 11 / 16

RAIDER SAFETY JET R504500
8
Revision A/2022.05.25//
1. P
ROPELLER
& A
NODE
R
EMOVAL
a. Begin by using a pair of needle nose pliers or similar to remove the cotter pin from the castle
nut.
b. Remove the castle nut using a socket wrench and appropriate socket.
c. Remove the washer and propeller from the prop shaft. The spacer between the propeller and
the lower unit should be left on the prop shaft.
d. Remove the zinc anode from the underside of the cavitation plate using a socket wrench and
appropriate socket.
e. Remove the carrier bolts from the lower unit using a socket wrench and appropriate socket.
Img 1a. Cotter pin removed
Img 1c. Spacer remains on prop shaft
Img 1d. Remove zinc anode Img 1e. Remove carrier bolts