- 19 -
terminal (Max 10A).
2. Rotate function switch to Current gear. The
initiate state of the meter is in automatic
range status, which shows "DC" symbol.
Then connect the test leads to the tested
circuit in serial, the tested current value
and the current polarity of the point where
the red one is contacted will be displayed
on the screen simultaneously.
Caution
:
1. If “OL” is displayed on LCD, it indicates
the tested current value has exceeded the
present range limit, please select higher
range to complete the measurement.
2. The Max input value is 400mA or 10A.
(Depending on the terminal where the red
test lead is contacted)