- 15 -
2-2-1. DCV
1. Turn the
function/range selection switch
to "
" Range;
2. The initiate state of the meter is in
automatic range status, which shows
"AUTO" symbol;
3. Make the test leads contacted to the testing
points. The voltage and polarity of the
point where the red test lead is contacted
will be displayed on the screen.
Caution
:
1. Don't measure voltage over 600V.
Otherwise,
it may cause damage to the
meter
.
2. When measuring high voltage, more
attention should be paid to personal safety
and avoid your body getting in touch with
