76
9.3.9.5
Join Network
You can tell the MultiRAE to automatically join a network with a certain PAN ID without having to
specify the communications channel. The PAN ID is shown for reference (if it is incorrect, you can
change it in ProRAE Studio II). Press [Y/+] to join.
Note:
If Roaming is turned on, instead of a PAN ID
number, you see “- - -”.
While it is searching for a network to join, the display shows this message:
Joining Network
Please Wait
If it is unsuccessful, you will see this message:
Failed To Join Network
Check your other settings, as well as those of the network you are trying to join.
You can press [Y/+] to retry or [N/-] to quit.
9.3.9.6
Interval
This menu allows you to change the interval between wireless transmissions. The interval can be set to
10, 30, 60, 120, or 240 seconds.
1.
Scroll down the list of intervals by pressing [N/-] until the interval you want is highlighted.
2.
Select the highlighted interval by pressing [Y/+].
3.
Save or register the change:
Press [Y/+] to save the change.
Press [N/-] to undo the change.
Note:
The default interval is 30 seconds.
Note:
When in TVOC Mode, MultiRAE Benzene behaves exactly like other models. In Benzene Mode,
however, ProRAE Guardian shows “sampling”
during countdowns and then continuously shows snapshot
measurement of
“
Benzene: XXppm
”
until new measurement is done or until the instrument is used in
TVOC mode.
