Rae MiniRAE Plus PGM-76, Operation And Maintenance Manual

Page: 65 / 168

SECTION 4 PROGRAMMING IN HYGIENE MODE
4 - 9
4.6 Set Peak Alarm Limit
1. Set "Peak alarm limit" option is the 4th menu option in Table
4.1.
. - Display shows "PA xxx.x" with the left-
most digit flashing, where "xxx.x " is
the previously stored Peak alarm limit.
2. To modify this limit, starting from the left-most digit, use
[up] or [down] arrow key to change the digit value and
[enter] key to confirm the digit, the flashing digit will move
on to next digit to its right. Repeat this process until all 4
digits of the new Peak alarm limit are entered.
3. To preserve the previously stored Peak alarm limit, press
[menu] key at step 1 or in the middle of step 2, the unit will
abort the Peak alarm limit entry and move to the next menu
option.
4. Note: if the security level of the unit is set to "no change
allowed"(level 0), step 2 will not have any effect on the
previously stored alarm limits. Users can only view the limit
but can not alter the limit.