PROGRAMMING
4-19
4.5.2
Change STEL Limit
This sub-menu item allows the user to change the STEL
limit. The display shows “ STEL limit?”
1.
Press the
[Y/+]
key and the display will show a
flashing cursor on the left-most digit of the previously
stored STEL limit.
2.
To modify this limit value, use the
[Y/+]
or
[N/-]
key
to change the digit value and press the
[MODE]
key
momentarily to advance to the next digit. The flashing
digit will move on to next digit to its right. Repeat this
process until the new limit values is entered. Press and
hold the
[MODE]
key for 1 second to exit data entry
mode.
3.
If there is any change to the existing value, the display
shows “Save?” Press
[Y/+]
to accept the new value
and move to the next sub-menu. Press
[N/-]
to discard
the changes and move to the next sub-menu.
