Rae Mesh Router, User Manual, Page: 21 / 51

Mesh Router
User’s Guide
21
Six choices (including Exit) are available:

LCD Contrast

Serial Number (read-only)

Firmware Version (read-only)

Factory Reset

Edit Password

Exit
To make a selection, scroll until the circle to the left of your choice is
black, and then press [MODE].
Note: If you do not make a selection in 60 seconds, it automatically exits
to the main screen.
9.1.1
LCD Contrast
The display’s contrast is adjustable via this menu. To access it, press
[MODE] when its name is highlighted (dark circle):
The contrast value is shown in the display. Step through the digits from left to
right by pressing [MODE]. Change a digit’s value by pressing [Y/+] to
increase and [N/-] to decrease. After the third digit, you see a flashing “?”

Save your changes by pressing [Y/+].

Exit without saving changes by pressing [N/-].

Step back to the first digit by pressing [MODE].