Mesh Router
User’s Guide
13
6
Operation
The Mesh Router only operates in RTR mode. Therefore, when it is
turned on, it is always operational.
Whenever you start Mesh Router, it tries to rejoin the last network it was
part of. Therefore, if the network is within range and if the channel and
Pan ID have not changed, the Mesh Router should be able to rejoin the
network without action on your part.
Make sure the battery is installed before operating the Mesh Router.
Refer to page 36 for information on battery installation and replacement.
6.1
Turning The Mesh Router On
Hold down the [MODE] key and release it when the Mesh Router beeps.
The display indicates that it is now on:
The Mesh Router performs a self-test. The display briefly shows the
firmware version:
Next, it shows the firmware’s build date and time: