Installation
Chapter 5
RADWIN 2000 User Manual
Release 2.5.40
5-20
Figure 5-19: Services and Rates - RADWIN 2000 C master, RADWIN 2000 clients
The yellow areas should not be used. Using those areas, you may loose the collocated link
with the longest distance between sites.
Asymmetric Allocation and TDM
You cannot use this feature when TDM services are used. Selection of TDM ports as in the
next section will reset the Ethernet balance to 50% in each direction and the green slider will
not appear in subsequent Installation or Configuration runs.
Cancelling TDM port use will make the allocation bar reappear, re-enabling asymmetric Ether-
net traffic allocation.
If you are not using TDM services, clicking Next will take you to
Step 8,
and completion of
the installation. Your Ethernet capacity allocation will be reflected in
Figure 5-34
below.
TDM Services selection
To select services:
1. Click the Configure button. The TDM services dialog is displayed:
