Configuration
Chapter 7
RADWIN 2000 User Manual
Release 2.5.40
7-11
Figure 7-11: Services and Rates dialog
To choose Services, see the corresponding Installation procedure in
Chapter 5
.
If you are using a link that -
• is non-collocated
• is Ethernet-only
• uses model RADWIN 2000 C ODUs
then you may use Asymmetric Allocation. You may change the capacity allocation here the
same way as during installation. In place of the IDU box in
Figure 7-11
, you will see the
Asymmetric Allocation slider:
The procedures for setting the Jitter Buffer and Hot Standby parameters are also the same as
the corresponding procedures in
Chapter 5
.
Click Next to continue.
Step 7, TDM Clock Configuration
The following dialog is displayed:
