Default RADWIN 2000 Settings
Chapter 4
RADWIN 2000 User Manual
Release 2.5.40
4-11
Default RADWIN 2000
Settings
The default settings of the RADWIN 2000 configuration parameters are listed in the second
column of
Table 4-4
below. The third column shows the values we use in this manual for
illustrative purposes.
Using RADWIN Manager Spectrum View
Prior to running the Installation Wizard (
Chapter 5
), you may use the RADWIN Manager
Spectrum View utility.
The RADWIN Manager Spectrum View utility is an RF survey tool designed to support the link
installation prior to full link service activation. The tool provides comprehensive and clear
information enabling easier, faster and better quality installations.
To launch Spectrum View, go to the main window menu (
Figure 4-11
) and click Tools |
Spectrum View. A display similar to the following appears:
Table 4-4: Default Settings
Parameter
Default Value
Illustrative Value
Factory default band
Product dependent
5.820GHz
ODU IP Address
10.0.0.120
192.168.1.101 and 102
Subnet Mask
255.0.0.0
255.255.255.0
Trap destination
0.0.0.0
0.0.0.0
RADWIN Manager log-on
passwords
Observer
admin
Operator
admin
Installer
wireless
Link ID
Link
EBG_20561334
Link Name
Name
TPSF_BTT
Site 1
Site
A
Site 2
Site
B
Location (per site)
Location
A
B
Name (per site)
Name
Here
There
Contact (per site)
Person
John
Mary
Link Password
wireless-bridge
Rate
Adaptive
Ethernet Configuration
Auto Detect
Radio Link Failure Actions
No action
Bridge or Hub mode
Hub Mode, Aging time = 300 sec
Community values
Read-write – netman
Read-only – public
