Radwin 2000 C PLUS, User Manual

Page: 274 / 297

RADWIN 2000 C Plus User Manual Release 3.5.70 C ‐ 41
MIB Traps Chapter C
externalAlarmInPort3Alarm 112 major The trap is sent every time an alarm occurs in the
External Alarm Input of port #3. Contains a single
parameter which is its description: 1 ‐ Description:
External Alarm 3 ‐ <User Text> ‐ Alarm.
externalAlarmInPort4Alarm 113 major The trap is sent every time an alarm occurs in the
External Alarm Input of port #4. Contains a single
parameter which is its description: 1 ‐ Description:
External Alarm 4 ‐ <User Text> ‐ Alarm.
swVersionsMismatchFullCompatibilityAlarm 114 warning The trap is sent if SW versions mismatch with full link
functionality. Contains a single parameter which is its
description: 1 ‐ Description: Software versions
mismatch ‐ full link functionality
swVersionsMismatchRestrictedCompatibilityAlarm 115 minor The trap is sent if SW versions mismatch with restricted
link functionality. Contains a single parameter which is
its description: 1 ‐ Description: Software versions
mismatch ‐ restricted link functionality
swVersionsMismatchSoftwareUpgradeRequired 116 major The trap is sent if SW versions mismatch and SW
upgrade is required. Contains a single parameter
which is its description: 1 ‐ Description: Software
versions mismatch ‐ Software upgrade required
swVersionsIncompatible 117 critical The trap is sent if SW versions are incompatible.
Contains a single parameter which is its description: 1 ‐
Description: SW Versions incompatible
hssMultipleSourcesDetectedAlarm 118 major Indicates that multiple sync pulse sources were
detected. Contains a single parameter which is its
description: 1 ‐ Description: HSS multiple sync sources
were detected.
hssSyncToProperSourceStoppedAlarm 119 major Indicates that synchronization to a proper sync pulse
source was stopped. Contains a single parameter
which is its description: 1 ‐ Description: HSS sync pulse
‐ Down. The reason is: %s. %s ‐ Is the reason for the
sync down.
hssSyncPulseDetectedAlarm 120 major Indicates that HSS additional sync pulse was detected.
Contains a single parameter which is its description: 1 ‐
Description: HSS additional sync pulse was detected.
tdmBackupAlarm 121 major Indicates that the TDM backup link was activated.
Contains a single parameter which is its description: 1 ‐
Description: TDM backup alarm ‐ backup link was
activated.
linkLockUnauthorizedRemoteODU 122 major Indicates that the remote ODU is unauthorized.
Contains a single parameter which is its description: 1 ‐
Description: Unauthorized remote ODU connection
rejected.
linkLockUnauthorizedODU 123 major Indicates that the ODU is unauthorized. Contains a
single parameter which is its description: 1 ‐
Description: Unauthorized ODU connection rejected.
hotStandbyAlarm 124 major Indicates that the hot standby secondary link was
activated. Contains a single parameter which is its
description: 1 ‐ Description: Secondary Link Is Active.
sfpInsertion 126 normal Indicates that a device was inserted to SFP Port
sfpPort1DisconnectedAlarm 127 major Indicates the SFP port 1 status changed to
disconnected.Contains a single parameter which is its
description: 1 ‐ Description: SFP port 1 status changed
to disconnected.
ringRplStateActiveAlarm 128 major RPL state changed to Active.
desiredRatioCanNotBeAppliedAlarm 129 normal Indicates Desired UL/DL RAtio Can Not Be Applied.
Table C ‐ 3: MIB Traps (Sheet 4 of 8)
Name ID Severity Description