Radwin 2000 C PLUS, User Manual

Page: 171 / 297

RADWIN 2000 C Plus User Manual Release 3.5.70 13 ‐ 4
VLAN Configuration Using the RADWIN Manager Chapter 13
Egress Direction
VLAN Configuration Using the RADWIN
Manager
Management Traffic and Ethernet Service Separation
You can define a VLAN ID for management traffic separation. You should configure the system
to prevent conflicts as detailed below.
When configured for the default operational mode, a “Provider port” will handle ingress
traffic as follows:
• Filters frames that are not tagged with the Provider VLAN ID
• Removes the Provider double tag
Therefore, if a port is configured for management traffic separation by VLAN and as ‘Provider
port’, then the received management frames must be double tagged as follows:
Table 13 ‐ 2: Port settings ‐ Egress direction
Transparent
The port ‘does nothing’ with regard to VLANs ‐ outbound frames are left
untouched.
Untag all
Port configured to untag user VLAD tags for all frames.
Filter
Disclaimer
If you are not a VLAN expert, please be aware that incorrect VLAN
configuration may cause havoc on your network. The facilities described
below are offered as a service to enable you to get best value from your
RADWIN 2000 C Plus links and are provided “as is”. Under no circumstances
does RADWIN accept responsibility for network system or financial
damages arising from incorrect use of these VLAN facilities.