Pressing button
causes the start of testing without saving the newly
estimated tare value in the product record in the assortment database.
Pressing button
causes the start of testing with saving the newly
estimated tare value in the product record in the assortment database.
During the control procedure all results are monitored in real time and
displayed on the screen.
During the
„Non-destructive average tare”
test the following data are
displayed:
Put full 1 / 30
- Command concerning the weighing process and
a product number out of the sample quantity
P
- Number of performed measurements of full
packages and the sample quantity
NM
- Nominal weight of the tested product
X
- Average weight of the tested product
DX
- Boundary disqualifying average value
T1
- Number of errors within limit
T1
in the sample
2T1
- Number of errors within limit
2T1
in the sample
S
- Standard deviation
Wynik
- Test resilt: positive or negative
Towar
- Tested product name
After the test has been comleted the test is summarised and the results
are automatically saved in the database:
114
Summary of Contents for Y/KTP series
Page 2: ...2 DECEMBER 2011...
