RADWAG Y/KTP series, User Manual

Page: 49 / 176

The scale can communicate with the reader via following ports:
•
RS 232 (COM1),
•
RS 232 (COM2).
16.4.2. Procedure of attributing the card number to an operator
To use a transponder card to log on an operator the card needs to be
ascribed to the operator in the database of operators.
Procedure:
•
Connect the transponder card reader to the required communication
port (RS 232 COM1 or RS 232 COM2),
•
Choose a communication port for the reader (see ch. 16.4.1 in this
manual),
•
In submenu
< Communication>
set the baud rate to the same
as in the reader (default 9600b/s),
•
Enter the database of operators and edit the selected operator going
to the field
< Card Number>
,
•
After entering the field
< Card Number>
you will see the editing
field
<Card Number>
with the screen keyboard,
•
Having approached the card to the reader the program automatically
displays in editing field
<Card Number>
the number of read card,
•
Confirm the number by pressing and return to weighing.
16.5. Additional display
16.5.1. Additional display port
Procedure:
•
Enter parameters group
< Devices>
according to ch. 16
of this manual, select
„ Additional display
/
Port”
and then choose an appropriate option from the list.
49