- 90 -
OMI CR LF
n_”Nazwa modu” CR LF:
n_”Nazwa modu” CR LF
OK CR LF
– command carried out, response:
accessible working modes
OMI_I CR LF
– command understood but not
accessible at this moment
Mode name
– parameter, working mode name, inserted in between inverted comas. The name takes
form given on a particular balance display, it is provided in a currently selected language.
n
– parameter, decimal value determining working mode number.
n →
1 – Weighing
2 – Parts Counting
3 – Deviations
4 – Dosing
5 – Formulas
6 – Animal Weighing
8 – Solids Density
9 – Liquids Density
10 – Peak Hold
11 – Totalizing
12 – Checkweighing
13 – Statistics
CAUTION! Working modes numbering is identical for each kind of balance. The numbers are assigned to
working modes names. Some balances give only the number as a response.
An example 1:
Command:
OMI CR LF
– return
accessibl
e
working
modes
Response:
OMI CR LF
2_” Parts counting” CR LF
4_” Dosing” CR LF
12_”Checkweighing” CR
LF
–
accessibl
e
working
modes
are given
in return:
mode
number
+ name
OK CR LF
–
comman
d carried
out
An example 2:
Command:
OMI CR LF
– return
accessibl
e
working
modes
Response:
OMI CR LF
2 CR LF
4 CR LF
12 CR LF
–
accessibl
e
working
modes
are given
in return:
mode
Summary of Contents for PS R1
Page 99: ...99...