RADWAG PS R1, User Manual, Page: 87 / 99

- 87 -
value in a current
measuring unit
where: _ - space
Switch on continuous transmission in a basic measuring unit
Format: C1 CR LF
Response options:
C1_I CR LF
- command understood but not
accessible at this moment
C1_A CR LF - command understood and in progress
MASS FRAME
- response: mass value in a basic
measuring unit
Response format:
1 2 3 4 5 6 7-15 16 17 18 19 20 21
S I space
stability
marker
space character mass space unit CR LF
Switch off continuous transmission in a basic measuring unit
Format: C0 CR LF
Response options:
C0_I CR LF
- command understood but not
accessible at this moment
C0_A CR LF - command understood and carried out
Switch on continuous transmission in a current measuring unit
Format: CU1 CR LF
Response options:
CU1_I CR LF
- command understood but not
accessible at this moment
CU1_A CR LF - command understood and in progress
MASS FRAME
- response: mass value in a current
measuring unit
Response format:
1 2 3 4 5 6 7-15 16 17 18 19 20 21
S U I
stability
marker
space character mass space unit CR LF
Switch off continuous transmission in a current measuring unit
Format: CU0 CR LF
Response options:
CU0_I CR LF
- command understood but not
accessible at this moment
CU0_A CR LF - command understood and carried out
Set min checkweighing threshold
Format: DH_XXXXX CR LF , where: _ - space , XXXXX – mass format
Response options:
DH_OK CR LF
- command carried out
ES CR LF
- command not recognised (mass
format incorrect)
Set max checkweighing threshold
Format: UH_XXXXX CR LF , where: _ - space , XXXXX - mass format
Response options:
UH_OK CR LF
- command carried out
ES CR LF
- command not recognised (mass
format incorrect)
Give value of min checkweighing threshold
Format: ODH CR LF
Response: DH_MASA CR LF - command carried out