- 40 -
If option
<LASt>
is choosen in the scale program displays estimated
unit mass of the last piece (about 3 sekonds) and then goes to
Counting pieces
automatically setting the previously displayed
value as valid for the procedure.
If the
<FrEE>
option is selected you will see:
Using
and
enter the required sample quantity,
where:
- selection of digit position,
- setting the digit,
Confirm the value by pressing
,
You will see
<LoAd>
on the display and then:
If weighing is performed in a container put the container on the pan
first and then tare it. Then put the declared quantity of pieces on the
pan and confirm it when stable (signalled by
):
The program will automatically calculate the mass of a single piece
and go on to the
Piece Counting
mode (
pcs
). You will see the
following display:
