'Getting Started' | 8
RADVISION | User Guide for SCOPIA XT1000 Series Version 2.0
Procedure
Step 1
In the Main Menu page, scroll to Settings.
Step 2
Press
Quick setup on the Remote Control Unit.
Step 3
Navigate to Quick setup 6/6.
Figure 1-7
Defining IP Settings
Step 4
Use the up arrow key to navigate to Use IPv6. This field is set to use IPv4 by default. If you want
to use IPv6, press
. Scroll to Yes and press
Step 5
Use the down arrow key to navigate to Automatic IP address. Press
and scroll to Yes. Set the
IP addresses as discussed with your network administrator.
Step 6
Press
Finish to exit the quick setup wizard.
Setting the Language Interface
You may set the language interface in the Quick Setup Wizard or from the Main Menu page.
Procedure
Step 1
In the Main Menu page, select Settings, then press
User settings.
Step 2
The General page appears. Use the arrow keys to select the required language interface from the
drop-down list.
Step 3
Press
Save to save the new setting.
