'Getting Started' | 10
RADVISION | User Guide for SCOPIA XT1000 Series Version 2.0
Procedure
Step 1
On the Main Menu page, scroll to Settings.
Step 2
Press
User settings. The General page appears on the display.
Figure 1-9
Setting the Remote Control Unit Code
Step 3
Using the arrow keys, scroll to the Remote control code field and type a number. You can enter
a number between 1 and 99.
Step 4
Press
Save.
Step 5
Simultaneously press
and
. The
button becomes red.
Step 6
Using the keypad, type the number you just entered in the Remote control code field.
Step 7
Press
Finish.
Restoring Default User Settings
You can use the User settings page to change the default settings of the system and adapt them
to your work requirements. You can restore the default user settings at any time.
Restoring default settings causes a system restart.
Procedure
Step 1
From the Main Menu page scroll to Settings and press
on the Remote Control Unit to enter the
User Settings page.
Step 2
Select Load default values.
Step 3
Select Yes to confirm.
